Safety Notes - Chauvet Professional Atmos Guía De Referencia Rápida

Atmos™ QRG
About This Guide
Disclaimer

Safety Notes

Contact
What Is
Included
AC Power
AC Plug
Resetting the
Breaker
The Atmos™ Quick Reference Guide (QRG) has basic product information such
as connection, mounting, menu options, and DMX values. Download the User
Manual from www.chauvetprofessional.com
The information and specifications contained in this QRG are subject to change
without notice.
·
DO NOT open this product. It contains no user-serviceable parts.
·
Always disconnect from power before cleaning.
·
Do not touch the output nozzle on this product during or after operation.
·
Only use Chauvet approved High Density Fog Fluid (HDF) and Quick
Dissipating Fog Fluid (QDF) fluid.
·
Do not add anything to the fog liquid.
·
Do not drink the fog liquid.
·
Do not allow the fog liquid to touch your skin or eyes.
·
Mount this product in a location with adequate ventilation, at least
·
20 in (50 cm) from adjacent surfaces.
·
Do not leave any flammable material within 50 cm of this product while
operating or connected to power.
·
Do not operate this product outdoors or in any location where dust, excessive
heat, or water may affect it.
·
Do not operate this product if the housing, fluid tank, or cables appear
damaged.
·
Do not connect this product to a dimmer or rheostat.
·
Only connect this product to a grounded and protected circuit.
·
Only use the handles or the mounting bracket to carry this product.
·
In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
·
From outside the U.S., UK, Ireland, or Mexico, contact the distributor of
record to request support or return a product.
·
From inside the U.S., UK, Ireland, or Mexico, use the information in
Contact Us at the end of this QRG.
·
Atmos™
·
Neutrik® powerCON® power cord
This product comes in two models, each with a fixed input voltage power supply,
either 120 V, 60 Hz or 230 V, 50 Hz. Be sure you have the correct model for the
line voltage in your area.
Connection
AC Live
AC Neutral
AC Ground
This product is equipped with a resettable circuit breaker. If the breaker trips, all
sections of this product will lose power. To reset the breaker:
1. Disconnect this product from power.
2. Allow unit to cool for 15 minutes.
3. After 15 minutes, you may attempt to reset the breaker by pressing the button
with your finger.
4. Plug the product's power cord into the power outlet and continue using as
recommended.
for more details.
·
·
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
2
Warranty Card
Quick Reference Guide
Screw Color
Brown Yellow/Brass
Blue
EN
Silver
Green