EN
42
Hand Grip
Hand grips are located at G_1/ G_2.
Hold the hand grips on the console
handrail until a heart rate is displayed.
For best results, hold the hand grips
lightly and ensure that your hands
contact both sensors of each grip. Hold
your hands as steady as possible as
movement can cause interference on
the contacts.
•
The heart rate window will display "P"before the heart rate value is
detected.
•
The value will keep flickering if the current data is unstable.
•
After receiving stable heart rate data, loosen your hands, the LED
window will continue to display the value for about 10 seconds before it
disappears.
Speaker
Speakers are located at G_3. This
treadmill adopts stereo system.
Audio playback function in 3 cases:
G_3.1 Audio input
G_3.2 Audio output
G_3.3 Usb-anschluss
Connect your phone through an audio cable
and use your phone to control the playback.
Connect the earphone cable, insert USB flash
disk and play it directly.
Insert the USB flash disk and play the audio
file.