GLÄSS MySpa 226 Manual Del Usuario página 26

FRONT
VIEW
6.5 cm
Point for power intlet (Cable Min. L=200 cm).*It changes according to the type of the panel.
** tolerance +1 cm
DRAIN: connection with joint 3/4" M or joint (delivered with the spa) for hose Ø16.
NOTE: All dimensions are approximate; measure your spa before making critical design or
pathway decisions.
NOTE: Manufacturer requires that the MySpa 231 be installed on a minimum 4" thick reinforced
concrete pad or structurally sound deck able to support the "dead weight" found in the spa
specification chart.
WARNING: The MySpa 231 must not be shimmed in any manner.
MySpa 231
Dimensions
Air vents
DRAIN
DO NOT BLOCK!
231 cm
227.3 cm** (built-in)
221 cm
BOTTOM VIEW
Air vents
26
6.5 cm
INSPECTION PANEL SIDE
3.8 cm