Setting Up; Insert The Batteries And Turn On The Unit - AKG B23 L Modo De Empleo

3 Setting up

Insert the batteries and
turn on the unit
B23 L
1) Pull off the belt clip (9) .
2) Pull the battery compartment cover (10) downward.
3) Insert two AA batteries into the battery compartment
and ensure that they have been inserted in the right
direction.
If the batteries have been inserted in the wrong
direction, the unit will not be supplied with power.
4) Switch on the unit using the ON/OFF switch (7).

If the status LED (8) lights up for approx.
one second immediately after switching on,
the batteries are in good condition and the
unit is ready for operation.

If the Status-LED does not light up, the
batteries are empty or inserted incorrectly.
Insert new batteries or insert the batteries
correctly. Ensure that the batteries are facing
the right direction!

If the Status LED lights up during operation,
the batteries are depleted. Exchange the
batteries with new ones as soon as possible.
5) Close the battery compartment by sliding the battery
cover over the battery compartment until it clicks into
place.
6) Insert the belt clip.
Setting up
19