TaoTronics PULSE X TT-SK10 Guia Del Usuario página 6

How To Use
Charging
1. Connect the charging port with any USB charging
adapter or active computer USB port.
2. Charging will start automatically with the charging
indicator turning red.
3. The speaker is fully charged when the charging indicator
turns off.
Pairing
1. Turn on the speaker by pressing and holding the Power
Button for 2 seconds.
2. Once the speaker is on, it will go into pairing mode
automatically and the Bluetooth indicator will ash rapidly.
3. Activate the Bluetooth function on your device and search
for nearby Bluetooth connections.
For iOS: Settings > General > Bluetooth > On
For Android: Settings > Bluetooth > On > Scan for devices
4. Select "PULSE X" from search results and tap to connect.
5. The Bluetooth indicator will turn solid blue and there will
be a beep sound to indicate a successful connection.
Note:
• Please make sure no other open Bluetooth devices are within
range, and that the speaker is within 3 feet of your device.
• The speaker will attempt to pair with the last paired device
when powered on. If you have previously paired the
speaker with a device, simply turn on your device and the
speaker, they will pair automatically without going into
pairing mode.
• If a PIN code is required for pairing, please try "0000"
or"8888" (4 zeroes or 4 eights).
AUX Mode
Connect any device to the PULSE X using a 3.5mm AUX cable.
Turn on the speaker and play music through AUX mode.
Note:
• When an AUX cable is connected to the speaker, Bluetooth
will be disabled.
• There will be a beep sound when a cable is
inserted/removed.
Troubleshooting
Q: My speaker will not switch on.
A: Please recharge it and make sure it has enough power.
Plug the unit into a charger and see if the LED indicator
becomes solid red.
Q: Why can't I pair this speaker with other Bluetooth devices?
A: Please check the following:
• Your Bluetooth device supports the A2DP profile.
• The speaker and your device are next to each other (within
3 feet).
07/08