Installing/Removing The Prep Bowl - Kitchen Aid KFP1642 Instrucciones De Uso

USINg YOUR ACCESSORIES

Installing/removing the prep bowl

NOTE: The prep bowl can be used only with the discs and the dicing kit.
To use the prep bowl, place into the
1
work bowl, using the two finger grips.
Place the desired disc on the power
3
shaft. Do not use any blades with the
prep bowl.
After processing, remove the prep bowl
5
using the two finger grips.
IMPORTANT: Discs and adapters must be removed before removing bowls.
18
Place the adapter on the power shaft.
2
Install the work bowl lid, aligning
4
the tabs and locking it into place.