FOOd PROCESSOR SAFETY
17. Do not use appliance other than intended use.
18. Disconnect from supply circuit before cleaning or servicing.
19. CAUTION: Do not open until blade stops.
20. CAUTION: To ensure continued protection against risk of electric shock, connect to
properly grounded outlets only.
SAvE ThESE INSTRUCTIONS
Electrical requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
Volts: 120 VAC
Hertz: 60 Hz
NOTE: This Food Processor is equipped
with a three prong grounded plug. If the
plug does not fit fully in the outlet, contact
a qualified electrician. Do not modify the
plug in any way.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or serviceman install an outlet
near the appliance.
5