RISK FROM FLYING OBJECTS
WHAT CAN HAPPEN
•
The compressed air stream can
cause soft tissue damage to
exposed skin and can propel dirt,
chips, loose particles, and small
objects at high speed, resulting in
property damage or personal injury.
RISK OF HOT SURFACES
WHAT CAN HAPPEN
•
Touching exposed metal such as
the compressor head, engine head,
engine exhaust or outlet tubes, can
result in serious burns.
WHAT CAN HAPPEN
•
Moving parts such as the pulley, fly-
wheel, and belt can cause serious
injury if they come into contact with
you or your clothing.
•
Attempting to operate compressor
with damaged or missing parts or
attempting to repair compressor
with protective shrouds removed
can expose you to moving parts
and can result in serious injury.
HAZARD
HOW TO PREVENT IT
•
Always wear certified safety equip-
ment: ANSI Z87.1 eye protection
(CAN/CSA Z94.3) with side shields
when using the compressor.
•
Never point any nozzle or sprayer
toward any part of the body or at
other people or animals.
•
Always turn the compressor off
and bleed pressure from the air
hose and air tank before attempt-
ing maintenance, attaching tools or
accessories.
HAZARD
HOW TO PREVENT IT
•
Never touch any exposed metal
parts on compressor during or
immediately after operation.
Compressor will remain hot for
several minutes after operation.
•
Do not reach around protective
shrouds or attempt maintenance
until unit has been allowed to cool.
HAZARD
RISK FROM MOVING PARTS
HOW TO PREVENT IT
•
Never operate the compressor with
guards or covers which are dam-
aged or removed.
•
Keep your hair, clothing, and gloves
away from moving parts. Loose
clothes, jewelry, or long hair can be
caught in moving parts.
•
Air vents may cover moving parts
and should be avoided as well.
•
Any repairs required on this product
should be performed by authorized
service center personnel.
7 - ENG