Introduction; Parts & Assembly - Nostalgia Products PSHPOP600 Instrucciones Y Recetas

INTRODUCTION

Thank you for purchasing the PUSH POP KIT from Nostalgia™! Now the only thing limiting
the number of tasty push pop treats you can make is your imagination! From fruit and
yogurt push pops to layered cake push pops, there are many amazing and creative ways to
use your PUSH POP KIT. Simply fill each push pop with ice cream, yogurt, gelato, whipped
cream, jello, and more for a uniquely original dessert. Great for any party theme or holiday.
PARTS & ASSEMBLY
PARTS
Bottom Cap
ASSEMBLY
1. Begin by screwing the Top Cap to the top of the Cylinder, from unlock ( ) to lock ( ). The top
of the Cylinder is marked with the triangle ( ) symbol.
WARNING: CHOKING HAZARD - Silicone Gasket presents a choking hazard. Be
sure Silicone Gasket is securely placed in the Top Cap before use.
2. Fill each push pop Cylinder according to your recipe.
NOTE: Make sure ingredients do not exceed MAX fill line on Cylinder.
3. Once filled, place the Push Stick into the bottom of the Cylinder. The bottom
of the Cylinder is located at the opposite end of the triangle ( ) symbol.
4. Place the Bottom Cap over the Push Stick and screw
clockwise into the bottom of the Cylinder.
5. To store treat for later, simply stand the push pop Top Cap-down in the refrigerator or freezer.
6. When ready to eat, twist off the Top Cap and push up on
the Push Stick to bring treat to the surface.
3
Cylinder
Push Stick
Silicone Gasket
Top Cap