Kohler 1263840 Guía De Instalación Y Cuidado página 10

Troubleshooting (cont.)
Troubleshooting Table
Symptoms Probable Cause
B. Damaged
C. Transducer is
2. The music A. Thermal shut
stops even
though a song
is properly
selected, and
the status
indicator light
is blinking
yellow.
B. Amplifier error.
3. The status LED A. Power supply is
is not
illuminated.
B. Power supply
1298482-2-A
Recommended Action
B. The bath has six
transducer wires. transducers with
cables that are
permanently
attached. Inspect the
six transducers for
frayed, cut, or loose
wires. Contact Kohler
Customer Service for
assistance.
C. If any one of the six
missing, loose, or transducers is
not attached. missing, loose, or not
attached to the bath,
contact Kohler
Customer Service for
assistance.
A. Shut down the
down. system for one hour
to allow the unit to
cool. Make sure the
area where the unit
is installed does not
exceed 104°F (40°C).
Restart the system.
The LED status
indicator should be
solid blue.
B. Call Kohler
Customer Service if
the amplifier LED
status indicator is
blinking yellow after
the system has been
restarted.
A. Plug the power
not plugged into supply into the
the outlet. outlet.
B. Check power supply
connection to the connection to the
amplifier is loose amplifier and
or disconnected. reconnect if needed.
10 Kohler Co.