Dispensing Cold Water; Dispensing Hot Water - Glacier bay VWD5446BLS-2-HDU Guía De Uso Y Cuidado

Operation

1. DISPENSING COLD WATER

2. DISPENSING HOT WATER

1
4
7
3. ADJUSTING THE TEMPERATURE (COLD WATER ONLY)
NOTICE: This model Water Dispenser left the factory with
the cold water temperature control factory "default setting"
positioned for "Energy Star" compliance (identified to the
side). This setting will deliver cold water temperatures
between 8°C ~ 10°C (46.4°F ~ 50°F) The cold water
temperature can be adjusted, (using a flat screwdriver) by
rotating the adjustment screw clockwise or anti-clockwise
between "Min" (cool) and "Max" (colder) until the desired
temperature is reached. NOTE: Any change/adjustment to
the cold water temperature control may effect Energy Star
efficiency.
194˚ F / 90˚ C
2
5
3
6
ENERGY STAR FACTORY
DEFAULT SETTING
TEMP
Min.
Max.
COLD WATER