CLEANING & MAINTENANCE
Please take care of your ELECTRIC COOKIE PRESS by following these
simple instructions and precautions. For best results, we recommend that
you clean your ELECTRIC COOKIE PRESS after each filling is used.
1.
Disconnect from the electrical outlet by unplugging the appliance.
2.
Unlock the Tube by holding the motor body with one hand, and the Tube with the
other hand. Turn the Tube so that the arrow on the Tube lines up with the unlock
position on the Motor Body (refer to Assembly section). Pull off to remove.
3.
Slide out the Shaft.
4.
Remove the Cookie Disc or Pastry Tip assembly from the Tube.
5.
Wash all removable parts and accessories in warm, soapy water. Rinse
and dry thoroughly with a non-abrasive cloth or towel.
6.
Wipe the exterior of the Motor Body with a soft, damp cloth and dry
completely making sure that no water gets inside the Motor Body.
7.
DO NOT use steel wool, scouring pads or abrasive cleansers, as they will damage the finish.
8.
A soft brush can be used to clean the inside of the Tube and Pastry Tips.
9.
Any other servicing should be performed by an authorized service representative.
10. NEVER immerse the ELECTRIC COOKIE PRESS in water or put in a dishwasher.
STORAGE
It is recommended that you keep the original box and packing materials and
repackage the ELECTRIC COOKIE PRESS as purchased. Store in a clean, dry location.
11