Serta 49734 Instrucciones De Ensamblaje página 4

Step 1 Turn the Star Base (2) upside down. Press the Casters (1) into holes at the end
of each leg. Turn the Star Base (2) upright and insert Gas Lift (3) into the center
hole of Star Base (2).
3
Customer Service Support: 1-800-379-9773
1
2
3
2
Function Instruction
TO ADJUST SEAT HEIGHT
While seated, lean forward and reach under the
right side of the chair to find the lever. Lift the
lever and raise your body up slightly to allow the
chair to rise to the desired height. Once desired
height is reached, release lever to lock chair at
desired height. To lower the seat, lift the lever
while seated. The chair will descend until the
lever is released or the chair reaches the bottom
position.
TO OPERATE TILT LOCKOUT
While seated, reach under the left side of the
chair to find the lever. Push down the lever and
lean back to allow the chair to tilt backwards. To
lock the chair in the upright or vertical position,
sit upright and pull the lever to the up position.
Customer Service Support: 1-800-379-9773
Operating Instructions
8