Using The Manual Meat Mixer; Using The Meat Mixeras A Grinder Attachment - Weston 36-2001-W Instrucciones De Uso

Now that the Meat Mixer is fully assembled and ready to use, it is time to
blend your favorite sausage or jerky meat mixture.
Be sure to read and fully understand the "General Safety Rules" at the
beginning of this manual before you start.

USING THE MANUAL MEAT MIXER

1. Place the Meat Mixer on a stable, level work surface. Allow ample room for
the Handle to rotate.
2. Place ground meat into the Mixing Tub. Add seasonings, cure and water
as necessary at this time.
3. Place the Clear Lid onto the Mixing Tub. DO NOT operate the Meat Mixer
without the Clear Lid in place. Serious injury may result!
4. Turn the Handle clockwise to mix.
5. Mix until the meat feels sticky to the touch. Do not over-mix the meat.
Remove the Clear Lid to test the consistency of the meat. DO NOT turn
the Handle and KEEP CLEAR of the Mixing Shaft Paddles during this step.
Replace the Clear Lid before you continue mixing.
6. When mixing is complete, remove the Clear Lid and Mixing Shaft before
removing the meat.
7. Refrigerate meat as soon as possible after mixing. DO NOT let meat sit
out for an extended period of time. Follow the basic rules in the "Food Safety"
section of this manual.
USING THE MEAT MIXER
AS A GRINDER ATTACHMENT
1. Place the Meat Mixer and attached grinder on a stable, level work surface.
2. Place ground meat into the Mixing Tub.
3. Place the Clear Lid onto the Mixing Tub. DO NOT operate the Meat Mixer
without the Clear Lid in place. Serious injury may result!
4. Attach the grinder to the power source. Turn "on" the grinder.
5. Add seasonings, cure and water as necessary through the slot in the Clear
Lid at this time.
6. Mix until the meat feels sticky to the touch. Do not over-mix the meat. To
check the consistency of the meat, first turn "off" the grinder and disconnect
it from the power source. Remove the Clear Lid. Keep clear of the Mixing
Shaft and Paddles while checking the meat. Replace the Clear Lid before
continuing.
7./ When mixing is complete, turn "off" the grinder and disconnect it from the
power source. Disconnect the grinder from the Meat Mixer.
8