Nivian ONV515 Manual De Instalación página 4

Nivian ONV515 IP Camera - Installation Guide
iOS installation
Download and installation options:
A. Find and download the iSmartViewPro app from App Store. (Revisar)
B. Find the app on the CD that accompanies the product (note that there could exist a
newer updated version of the app).
C. Check the available software on the product website www.nivian.info.
3. Add and configure the camera
Before you add and configure your camera, at the base of the device, find the label with
information about your ID, administrator username and password, as shown in the example
next to this text.
Android configuration
Step 1) Enter the installed app on your smartphone/tablet.
Step 2) Add the camera by the DID code.
Select add camera (Add camera)
There are three ways to add the device: manually, scanning the QR code or by
searching on the LAN.
a) LAN search: select the "Search" option and choose one of the cameras shown on the
screen.
b) Scan the QR code: select the "Scan ID" option and scan the QR code that is found on the
label at the camera base.
6
Nivian ONV515 IP Camera - Installation Guide
a) LAN search b) Scan the QR code
Step 3) If necessary, add username and password. The factory settings for both are
indicated on the label on the base of the camera (admin/123456).
Step 4) Press done (Done).
iOS configuration
Step 1) Enter the installed app on your smartphone/tablet.
Paso 2) Add the camera by the DID code.
Select add camera (Add camera)
There are three ways to add the device: manually, scanning the QR code or by searching on
the LAN.
7