Connect Original Hd Hero; Wi-Fi Remote - GoPro Wi-Fi BacPac Manual De Usuario

connecting: Hd HERO2 + Network
You can connect your HD HERO2 to a Wi-Fi network or
Hotspot to live stream, share photos + videos and control
multiple at a time using the GoPro App*.
Follow the steps below to connect your HD HERO2 and
Wi-Fi BacPac to a Wi-Fi Network for the first time:
1. Connect your HD HERO2 and Wi-Fi BacPac to your
Smartphone or Tablet. See steps in the HD HERO2 +
Smartphone / Tablet section for instructions on how
to do this.
2. Using the GoPro App, follow the instructions provided on
gopro.com/support to complete the Network setup.
* Live streaming, video + photo sharing to the web and Bluetooth
will be available with a future downloadable product update at:
gopro.com/update
60
connecting: Original Hd HERO
With the Wi-Fi BacPac attached to an Original HD HERO
camera, you can wirelessly connect to the Wi-Fi Remote.
The Wi-Fi Remote gives you control of up to 50 cameras at
a time from a range of up to 600ft/180m.
Your Wi-Fi BacPac and Wi-Fi Remote arrive pre-connected
in the Wi-Fi Combo Kit. Follow the steps below only if you
want to connect additional Original HD HERO cameras or
connect with a new Wi-Fi Remote.
Connecting your Wi-Fi Remote to additional Original Hd
HERO cameras:
1. Place your Original Hd HERO with Wi-Fi BacPac
into Connection Mode:
a. Make sure your Wi-Fi BacPac is attached to your
GoPro camera and powered ON.
b. Enter the HD HERO camera settings using the
POWER/MODE button. Press SHUTTER/SELECT to
enter the Settings Menu.
c. Toggle to the Wi-Fi Menu using the POWER/MODE
button. Press SHUTTER/SELECT to enter into the
Wi-Fi menu.

+ Wi-Fi Remote

61