GoPro Wi-Fi BacPac Manual De Usuario página 32

connecting: Original Hd HERO
+ Wi-Fi Remote
d. Select REMOTE using the SHUTTER/SELECT
button.
e. If connection is successful, you will see the
successful connection screen.
f. If connection fails, restart the process.
2. Place your Wi-Fi Remote into Connection Mode:
a. Ensure the remote is powered OFF.
b. On the Wi-Fi Remote, hold down the SHUTTER/
SELECT button while powering it ON.
c. Release the SHUTTER/SELECT button when you
see the connecting screen on the Wi-Fi Remote.
3. If the connection is successfully made,
you will see the following screen on
both camera and remote.
62
connecting: Original Hd HERO
After, you will be asked if you would like to
connect to another GoPro camera. To pair with
additional cameras, use the SHUTTER/SELECT
button to select YES, then repeat step one
above. Otherwise select NO.
4. If connection was not successful, you
will see this screen. Please repeat the
steps above.
+ Wi-Fi Remote
63