Troubleshooting Tips - Manhattan 152761 Manual Del Usuario

English
Four-port model shown
Instructions
1 Use HDMI and USB cables to connect all computers to the input ports.
2 Connect a monitor to the HDMI output port.
3 Connect a keyboard and a mouse to the respective USB output ports.
4 Plug in the power supply to the DC outlet port.
5 Turn on the connected equipment.
6 Switch between any PC via the button under each port LED or use the hotkeys described below.
A Press the Scroll Lock twice quickly; the buzzer beeps twice.
B Press the described key that follows within three seconds to execute the command.

Troubleshooting Tips

• Ensure switch cables are whole and properly connected.
• Make sure that mouse is less than 2000 dpi.
• Uplug the mouse and keyboard, and plug them in again.
• Press the RESET button.
• Unplug the power from the switch; plug in again. Then, press RESET.
2
2
DC /12V
4
Hotkey Combination
Page
Scroll Scroll
Lock Lock Up
Scroll Scroll
Page
Lock Lock Down
~
Scroll Scroll
1
Lock Lock
Scroll Scroll
0
Lock Lock
Scroll Scroll
Space
Lock Lock
Note: the default switching-
time interval is 6 seconds.
Scroll Scroll
+ -
Lock Lock
Scroll Scroll
F12
Lock
Lock
Scroll Scroll
9
Lock Lock
O UT P UT
INP UT 1 INP UT 2
3
Function
Previous port
Next port
Select port by number
4
Synchronization mode
Automatic switching
Adjust auto-switch time
by 1 second
Enable/disable buzzer
Auto switch by mouse movement
HDMI KVM Switch—
x4
INP UT 3 INP UT 4
Input 1 Input 2 Input 3 Input 4
6
User Manual
1