Required Tools; User Manual - PNI MAB300 Manual De Usuario

Warnings
Read this manual carefully before assembling and commissioning the
»
product. Incorrect installation and use can lead to product damage,
personal injury and property damage.
This product should be installed by qualified personnel only in compliance
»
with the safety rules. Installation by unskilled personnel leads to product
malfunction and personal injury.
Disconnect the general power source before installing the product or
»
maintenance work.
In case the electric cable is damaged, replace it with an entire one and well
»
insulated to avoid producing an electric shock.
Do not allow children or other persons to stay in the gates opening area
»
when they are in action.
Do not install the product in environments with corrosive, flammable or
»
explosive substances.
Do not install the engine in an area where the public could have access to
»
the manual gate actuation key.

Required tools

Electric drill
and drill bits
Socket set
3
Screwdriver set Electrical tape
Spanner set
Wire cutter
and stripper
Voltmeter
Soldering iron
(recommended)
(recommended)
G-Clamp

User manual