Technical Specifications - Velleman PCMP14 Manual Del Usuario

Altavoces para ipod
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

1. speaker
2. power switch
3. volume adjustment
4. power LED
4. Use
• Powering Your Sound Box
Your sound box can be powered either through a power adapter or by batteries. Simply connect the power
adapter to the DC input at the back and plug the adapter into the mains. To power the sound box by batteries,
open the two battery compartments in the base and insert 3 x 1.5V AA batteries in each compartment
respecting the polarity.
NOTE: The battery power will automatically cut off when using the power adapter.
Your iPod
sound box through the power adapter as your iPod
• Connecting Your iPod
Your sound box comes with 4 Dock station adapters allowing you to connect either an iPod
nano 1G, an iPod
adapter and connect your iPod
• Connecting a Random Audio Device
Connect the HEADPHONE or LINE output of any other audio device to the sound box through the LINE input
using a cable with a standard 3.5mm plug (cable not incl.). Do not connect the sound box to the speaker
outputs of the connected device.
5. Troubleshooting
Problem
No sound.
iPod
will not play.
®

6. Technical Specifications

Power
Speakers
Impedance
Frequency Response
Distortion
Power Supply
PCMP14
will automatically charge when inserting it in the Dock station. Remember to power the
®
®
nano 2G, an iPod
®
2 x 5W
2 x 2"
8
80Hz~18kHz
1%
9VDC/1A adapter (incl., order code PS915) or 6 x 1.5V AA batteries
(not incl., order code LR6C)
5. bass tube
6. iPod
7. line input
8. DC input
will not charge with batteries.
®
4G or an iPod
®
®
with the sound box.
®
Possible Cause
Sound box is switched off.
Volume is turned down.
Auxiliary audio device or iPod
Wrong connection cable.
iPod
is switched off.
®
iPod
is wrongly connected.
®
- 4 -
Dock station
®
5G. Fit the station with the appropriate
is wrongly connected.
®
®
VELLEMAN

Publicidad

Tabla de contenido
loading

Tabla de contenido