Cleaning & Maintenance - Goodyear GOD0015 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

center.
7.Maintenance and care of the
Battery
• Ensure that your battery is always fitted
securely.
• A perfect connection to the cable network of
the electrical system must be ensured at all
times.
• Keep the battery clean and dry. Apply a thin
coating of grease to the connection terminals
using an acid-free, acid-resistant grease
(Vaseline).
• Check the level of the acid in batteries that
are not maintenance-free versions approximately
every 4 weeks and top up with distilled
water if necessary.
9. Cleaning, maintenance
Danger!
Always pull out the mains power plug before
starting any cleaning work.
8.1 Cleaning
• Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
• We recommend that you clean the device
immediately each time you have finished
using it.
• Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
cleaning agents or solvents; these could attack
the plastic parts of the equipment. Ensure
that no water can seep into the device. The
ingress of water into an electric tool increases
the risk of an electric shock.
• The charger should be placed in a dry room
for storage. Any corrosion must be cleaned
off the charging terminals.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
1 5

Publicidad

Tabla de contenido
loading

Tabla de contenido