Descargar Imprimir esta página

jbc AC 2600 ADVANCED Serie Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
Depending on the age of AD 2000 control unit,
you won't be able to accede so that you cannot
modify certain parameter.
If control unit belongs to the first production
series, nothing won't be showed on the console's
display.
The unit's components
Console AC 2600 ref. 2600000 is composed
b y :
- Monitor
- Converter
- Instructions manual
Converter
Console AC 2600 can be directly connected to
stations AD 2000, AD 2200 and AD 2700. In
order to connect the console to stations AD
4200, AD 4300, DI 3000, AR 5500, AR 5800, DS
5300, AM 6000 and AM 6500 you should place
the converter Ref. 0731100 between the end of
the console's cable and connector of the
station.
OPERATION
Once the console has been connected to the
control unit, it will automatically show in the
console's display the following messages:
CONSOLE AC 2600
VERSION X.xx
XXXXXX STATION
VER. XXXXXXXX
f this is not showing, it means that the control
unit is not ready to accept the console. That is
to say, the version is too old.
ALTER PARAMETERS
This function is used to alter the original
parameter which the control unit has been
configured with.
Tool selection.
It oblies prompts you to select the tool which you
want to work with and for the one you want to
change the parameters.
Temperature unit.
Selection of temperature units in Celsius grades -
°C- or Fahrenheit -°F-.
Max temperature.
till 400ºC or 750ºF).
It allows to change the maximum temperature
between 400ºC and 450ºC or 750ºF and 850ºF.
Ref. 0731000
Ref. 0731100
Ref. 0735400
Fix temperature.
This feature is used to fix the temperature.
Once the temperature has been fixed, you can
check the selected temperature in the station by
moving the selector dial, the green LED -READY-
will remain on while the dial is set at the locked
temperature.
If the dial is not set at the locked temperature,
the green LED -READY- will be blinking. The
further the dial will be set from the locked
temperature the slower the blinking pace will be.
Moving the temperature dial on a fixed station
will only influence the LED, the temperature
remains at the selected level.
The standard factory settings do not include a
fixed temperature.
The console's display will show «NOT FIXED» to
indicate that the station's temperature is not fixed.
Sleep delay time.
It regulates the delay time of the intake into
sleep mode since the time that the soldering
iron is left in the stand.
The longer this time is, the greater oxidation of
the tinning on the tip will be which will lessen the
cartridge life span.
It is advisable to indicate a delay time only when
the using of the iron is intensive, for example in
production, so to avoid interruption «stop & go».
Selected original time 0 minutes.
2
(Only for digital stations

Publicidad

loading

Este manual también es adecuado para:

2600000