3. Place your dry towel(s) inside. Replace the lid.
4. Press and hold the POWER BUTTON until the TIMER LED
INDICATOR turns on. The TIMER LED INDICATOR turns blue,
indicating the Towel Warmer is preheating (default timer setting is
15 minutes).
5. When the Tower Warmer has reached the optimal heating
temperature, the TIMER LED INDICATOR turns red. The Towel
Warmer will continue to maintain the optimal heating temperature
for the remainder of the timer setting (timer starts to countdown
when TIMER LED INDICATOR turns red).
6. To ensure the towel is fully heated, you may want to leave the
towel in the Towel Warmer for a few minutes after the TIMER turns
off.
7. The Towel Warmer will automatically turn off after the selected
timer setting has expired. Press the POWER BUTTON to turn the
Towel Warmer off if you would like to power off the unit sooner.
SELECTING THE TIMER
1. When the Towel Warmer is powered on, press the TIMER BUTTON
to automatically default to 15 minutes.
2. Press the TIMER BUTTON again to select the 30-minute timer.
3. Press the TIMER BUTTON again to select the 45-minute timer.
4. Press the TIMER BUTTON again to select the 60-minute timer.
FREQUENTLY ASKED QUESTIONS
Why won't my Towel Warmer turn on?
Make sure the Towel Warmer is properly plugged into a wall outlet.
Why is my Towel Warmer taking a long time to reach optimal heating
temperature?
Be sure to only use dry towels; using damp towels will greatly extend
the preheating cycle.
CARE AND MAINTENANCE
Remove the power cord from the electrical outlet before cleaning.
Wipe with a dry cloth.