Tools Needed - Salamander Designs D2/347AMxl Guía De Montaje

TOOLS INCLUDED
PART # DESCRIPTION
400-035 Level Wrench
400-030 1/4" Long Arm Hex Key
301-240 Double Sided Tape 1" x 2"
P-400-030 Driver Bit 1/4" Hex Key
400-080 5/32" Hex Key
400-060 3/16" Hex Key- Long Arm
400-125 1/2" X 8" Velcro Wrap Strap
warnings
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS FURNISHING
WARNING! Failure to comply with these instructions may result in accident involving serious personal
injury. Failing to follow these instructions can result in the product being damaged or being destroyed
or voiding of the warranty.
WARNING! For use with video monitors weighing 400 lbs (181 kg) and diagonal measure of 100 inches
(254 cm) or less. Use with heavier televisions may result in instability causing tip over resulting in death
or serious injury.
CAUTION!
• Close supervision is necessary when this furnishing is used by or near children, invalids,
or disabled persons
• Use this furnishing only for its intended use as described in these instructions.
Do not use attachments not recommended by the manufacturer.
• Do not use outdoors
• For Commercial use only
• Place cabinet with back to wall
Weight Capacities:
TIP HAZARD WARNING!
Cabinet must be affixed to wall.
For use with video monitors weighing 400 lbs (181kg) or less.
Use with heavier televisions may result in instability causing
tip over resulting in death or serious injury.
***** SAVE THESE INSTRUCTIONS
Accessories and Spare Parts
Please contact Salamander Designs 860.761.9500 or www.salamanderdesigns.com/commercial
Salamander 4 Bay Cabinet with XL Display Mount
Max Display Load: D2/347AMXL - 400 lbs (136kg)
Max Display Load: D3/347AMXL - 400 lbs (136kg)
Max Shelf Load (each) - Nominal - 100 lbs (45kg)

Tools needed

Drill Driver
#2 Phillips Head Screw Driver
1/2 Drill Bit for Standard Installation
3/16" Drill Bit for Wood Stud Installation
Pencil
Tape Measure
Level
*****
2 of 28 501-020 [9.17]