Error Messages - Gram Precision D1-1000 Manual De Utilización

4. Press the keys
5. Press the
6. Display shows " S-A-L" (Low limit)
7. Press the
8. Display shows "L00000"
9. Press the keys
10. Press the
c) Buzzer choose.
1. Display shows "S-buz"
2. Press the
d) Alarm mode setting.
1. Display shows " S-A-S"
2. Press the
3. Select the desired mode:
A-STAB= alarm when the weight is stable.
A-NSTA= alarm without stable condition.
To exit from setting mode, press the

ERROR MESSAGES

• Err2, means initial zero point is not stable.
• Err3, means the loading is not enough during two point calibration.
y to introduce the value.
key to confirm and save.
key to enter into.
y to introduce the value.
key to confirm and save.
key to enter into.
key to enter into.
key.
10