Toyota Corolla (With Nav) 2009-2013 - Metra 99-8300 Instrucciones De Instalación

Toyota Corolla 2009-2013
(with NAV)
1. Unclip and remove the (4) side trim panels
from the right and left side of the radio and
a/c controls. (Figure A)
2. Unclip and remove the a/c vent panel above
the factory radio. (Figure B)
3. Remove (4) 10mm bolts securing the radio.
(Figure C)
4. Remove (8) screws securing the brackets to
the factory radio and remove the brackets.
(Figure D
5. Remove (4) plastic clips from the back of the
factory radio.
Note: Retain clips for re-use during kit
assembly.
Continue to Kit Assembly
DASH DISASSEMBLY
(Figure A)
(Figure B)
(Figure C)
REMOVE (4) SCREWS
Remove (4) screws from factory bracket
FROM FACTORY BRACKET FROM EACH SIDE
from each side
(Figure D)
REV. 5/13/2020 INST99-8300
9