PURE Jongo S3 Manual Del Usuario página 7

Add Jongo to your wireless network
The Jongo Setup page should open automatically
A
on your device. If not, open your internet browser
and enter myjongo in the address bar.
If you want to rename your Jongo, type in the
B
new name and tap Change name.
Select your wireless network.
C
Enter your network password if required and
D
tap Connect.
Once you click Connect the light will pulse and
then turn solid green to show that your Jongo
is connected.
If the connection fails, the light will flash
!
red. Don't worry, this probably means
you mistyped your Wi‑Fi password.
Just go back to step 2 and try again.
EN