Chauvet Professional ROGUE R2X BEAM Guía De Referencia Rápida página 6

EN
Main Level
Lamp
Settings
(cont.)
Maintenance
Timer
Setup (cont.)
Reset
Function
Factory
Setting
Running Mode:
DMX Address:
Temperature:
Sys Info
Lamp On Time:
Remaining Time:
5
QUICK REFERENCE GUIDE
Programming Levels
Off Via Dmx
On If Dmx on
Off If Dmx off
Ignition Delay
Low Power Delay
Reset Lamp Time
Interval Time
Remain Time
Pan/Tilt
Shutter/Prism
Color
Gobo
Frost/Focus
All
NO
YES
Ver:
UID: _ _ _ _ _ _ _ _ _ _ _ _
Description
NO
Turns off the unit via DMX controller
YES
NO
Turns lamp on when DMX signal is detected
YES
NO
Turns lamp off when DMX signal is lost
YES
Selects duration of delay between product
000-255
power on and lamp power on
Sets duration of delay when shutter is
000-255
closed and lamp enters low power mode
NO Leaves lamp time unchanged
YES Resets lamp timer to 0
Defines amount of hours between
010–250
maintenance
RESET Resets maintenance cycle
NO Does not reset maintenance cycle
NO
Resets pan/tilt functions to the home
position
YES
NO
Resets all shutter and prism functions to the
home position
YES
NO
Resets all color functions to the home
position
YES
NO
Resets all gobo functions to the home
position
YES
NO
Resets the focus and frost functions to the
home position
YES
NO
Resets all functions to the home position
YES
Reverts the product back to the original
factory settings
V_ Displays the software version
_ _ _ Displays the current running mode
_ _ _ Displays the current DMX address
Displays the product's temperature in
_ _ _
Celsius
Displays the amount of time the lamp has
_ _ _ _ _ been on (provided the counter has been
reset upon installation of new lamp)
Shows amount of time remaining in
_ _ _ _ _
maintenance cycle
Displays the UID
Rogue R2X Beam QRG Rev. 2