Remote Control - Revell Control ARROW QUAD Manual Del Usuario

Maintenance and care:
• Please only use a clean, damp cloth
to wipe off the model.
• Protect the model and batteries from
direct sunlight and/or direct heat.
• Never allow the remote control and
charging unit to come into contact
with water, because the electronics
will be damaged as a result.
Technical changes and differences in
color reserved!
1A Rotor shaft with main gear wheel
1B Camera lens
1C LEDs
1D Battery compartment
2A No function
2B No function
2C Control for thrust and rotation
2D Photo button
2E Power LED
2F Antenna
2G Turbo button
2H Button for Headless Mode
2I Control for forwards/backwards and
sideways flight
3 INSERTING BATTERIES (REMOTE CONTROL)
3A Unscrew and remove the cover.
3B Insert 4 x 1,5 V AA batteries and pay attention to the polarity,
as shown in the battery compartment.
3C Close the battery cover and secure with the screw.
16
Required batteries for the model:
Power supply:
Rated output:
1 x DC 3,7 V / 3 Wh
rechargeable
LiPo battery (included)
Capacity: 800 mAh
Battery requirement for the

remote control:

Power supply:
DC 6 V
Batteries:
4 x 1,5 V "AAA"
(not included)
1 MODEL
1E ON/OFF switch
1F SD card slot
1G Camera
2 REMOTE CONTROL
2J Trim for forwards/backwards
2K Trim for sideways
2L ON/OFF switch
2M Button for lift-off
2N Button for landing
2O Battery compartment cover
2P Video button
2Q Securing screw