Technical Data - Healthcraft Smart-Rail SRS-S Manual De Instrucciones

OVERVIEW
Thank you for choosing the Smart-Rail from HealthCraft. Please read and
understand the instructions in this manual; keep manual for future
reference. It is your responsibility to see that your Smart-Rail is properly
assembled, installed, and cared for. Failure to follow instructions in this
manual could result in serious injury or death. If you are not equipped to
undertake the outlined work, we would recommend that you have your
Smart-Rail installed by a qualified contractor.
The Smart-Rail is a bed rail with 2 positions: closed and opened. In the
closed position, the rail is latched to the support frame to assist with in-bed
positioning. In the opened position, the rail is unlatched from the support
frame and pivoted out to the optimal location to assist with sitting and
standing. The Smart-Rail is intended ONLY for moderate vertical load
bearing to provide bed positioning, sitting and standing support for people
with reduced mobility. The Smart-Rail is installed between the mattress and
box spring, and is secured in place with a safety strap. In the closed
position, the Smart-Rail is height adjustable to accommodate the thickness
of the mattress. In the opened position, the Smart-Rail is height adjustable
to accommodate the height of the user. The maximum user weight for this
product is 300lbs / 136kgs. Product is not intended to support full body
weight. The Smart-Rail is not to be used in any other way than described
above.
WARNING - PATIENT ENTRAPMENT (see additional guidelines)
The potential risk of entrapment (limb, neck, head, torso) between the bed
rail and adjacent item (i.e. mattress, headboard, sidetables, etc.) can be
reduced or avoided by the following strategies:
1. Situate the bed rail at a distance that is considerably smaller or larger
than that which could result in entrapment.
2. Consider situations that could change with time or usage such as
mattress compression, patient movement, bed position changes due to
electrically powered beds, etc.
3. Realize that this product is not intended as a physical constraint or
barrier to exiting the bed.
LIMITED LIFETIME WARRANTY
Products are covered by a limited lifetime warranty against defects in
materials and workmanship for the original purchaser. Warranty excludes
products that have been damaged through misuse, accidental damage,
alteration, normal wear and tear, wood material and stain, or the use of
corrosive or abrasive cleaning products.
Buyer hereby indemnifies, agrees to hold harmless and defend HealthCraft
Products Inc. from and against any and all liabilities, claims, (founded and
unfounded), losses, damages, costs and expenses (including without
limitation consequential damages and reasonable professional fees)
resulting from buyers specification, application, or improper use of goods
described hereon; buyers omission or neglect. HealthCraft Products Inc.
does not assume any liability for damage resulting from services performed
by others or faulty installation, misuse or misapplication of goods sold by
HealthCraft Products Inc. HealthCraft Products Inc. shall not be liable for
prospective profits or special, indirect, or consequential damages, or for the
cost of any corrective work done without HealthCraft Products Inc. prior
approval. HealthCraft Products Inc. total liability hereunder shall in no
event exceed the purchase price of the goods specified hereon.
Specifications subject to change without notice.
HealthCraft Products Inc.
2790 Fenton Road
Ottawa, Canada
K1T 3T7
10
English
Gate 88
Kanalgatan 45 B
Skelleftea, Sweden
EC REP
931 23
DELIVERY CONTENTS - SMART-RAIL
1. Pivot Rail (x1)
2. Extension Leg (x2)
3. Side Frame (x2)
4. Back Frame (x1)
5. Face Plate Frame(x1)
6. Latch Collar (x1)
SAFETY CONSIDERATIONS
The Smart-Rail is intended to be used when the bed casters are locked.
The Smart-Rail is intended for moderate vertical load bearing ONLY.
The Smart-Rail is not intended for sideward (lateral) support.
The Smart-Rail is not intended to support the full weight of an individual.
The Smart-Rail is not intended for children to play or hang onto.
The Smart-Rail is not to be used on electric or hospital style beds.
The Smart-Rail is not to be used with light-weight mattresses, and the
mattress must fully cover base frame.
FRAME ASSEMBLY
1. Insert side frame into back frame and engage spring locks.
2. Assemble side frames to face plate with screws & lock washers.
INSTALLATION
1. While laying in bed, note position of waistline.
2. Slide rail between box spring and mattress, and align pivot tube of face
plate frame with waistline.
3. Install pivot rail into pivot tube of face plate.
4. Slide latch collar onto pivot rail. Ensure logo on latch collar is facing
upwards.
5. To set height of pivot rail in locked position, tighten set screw in latch
collar. NOTE: to minimize bed entrapment, maximum distance between
top of mattress and pivot rail is 4" / 10.2cm.
6. Slide plastic bushings onto ends of pivot rail.
7. Slide extension legs into pivot rail.
8. To set height of pivot rail in the opened position, align holes and install
locking pins.
9. When pivot rail is in locked position, ensure that the pivot legs are
between 2-6" / 50-150mm from the floor.
10. Loop the strap between the frame and the angle iron of the bed frame.
11. Tighten strap to pull rail tight against the side of the bed.

TECHNICAL DATA

See Figure E.
PRODUCT USAGE
See Figure F.
FIGURE A.
7. Plastic Bushing (x2)
8. Locking Pin (x2)
9. Safety Strap (x1)
10. 10-32 Screw (x4)
11. Lock Washer (x4)
12. Hex Key (x1)
FIGURE B.
FIGURE C.
FIGURE D.