GF Signet 2350 Importantes Instrucciones De Seguridad Para La Instalación

‡ SIGNET 2350 Temperature Sensor
3-2350.090-1
SAFETY INSTRUCTIONS FOR IN-LINE ELECTRODE INSTALLATION
1.
2.
3.
4.
Failure to follow safety instructions may result in severe personal injury!
The 3-2350 Temperature Sensors are pre-calibrated from -10 to
100°C (14 to 212°F) and are available in two versions.
Part No. Cable Length
3-2350-1 15 ft.
3-2350-2 6 in.
1. Installation
All versions install in 3/4 in. NPT pipe
fittings. Tighten sensor 1.5 turns past
finger tight until the groove on the side of
the sensor aligns with the flow. An
additional 3/4 in. pipe thread is
provided to attach a cable conduit
(-1 version) or a +GF+ SIGNET
integral transmitter mounting kit
(-2 version).
Fill with
3 to 4 in.
of sealant
2. Wiring
Black
Silver
Red
C-11/01 E/G/F/S
Do not remove from pressurized lines.
Do not exceed maximum temperature/pressure specifications.
Wear safety goggles or face shield during installation/service.
Do not alter product construction.
Attach 3/4 in. watertight pipe to
the top of the sensor. Secure
the threaded connection to
prevent any leakage. For
additional defense against
possible accumulation of
condensation at the back seal
area of the sensor, fill the lower
3-4 inches (75-100 mm) of
conduit or extension pipe with a
flexible sealant such as
silicone.
3-8350 Transmitter
Sensr V+
Sensr Gnd
Sensr In
3. Parts and Accessories
Part No.
5523-0222
4. Specifications
General
Temperature Range:
Process Connection:
Groove - must
Accuracy:
be on side
pointing in
Repeatability:
direction of flow
Fin - must
align with flow
Wetted Materials:
Cable Type:
Weight:
Signal Compatability:
Storage Temperature:
Standards and Approvals
• Manufactured under ISO 9001, ISO 14000
• CSA, CE, UL listed
Dimensions
105 mm
(4.15 in.)
Description
Sensor cable (per ft.)
-10 to 100°C (14 to 212°F)
3/4" NPT
±0.5°C (±0.9°F)
±0.1°C (±0.2°F)
PVDF
PVC jacketed, 2-conductor twisted pair
with shield (22 AWG)
Approx. 151g (0.33lbs)
8350 Temperature Transmitter
-55°C to 100°C (-67°F to 212°F)
27 mm
(1.05 in.)
197 mm
(7.75 in.)
3/4 in.
NPT
40.1 mm
(1.59 in.)
2350-1 2350
with integral kit and
transmitter (sold separately)
ENGLISH