Description Of The Palm - Wintec EASY PALM Manual De Utilización

Easy palm Multi SAVIA rev . 3.0 170 x 148.qxd

DESCRIPTION OF THE PALM

-Press for three seconds for turning the stimu-
lator ON.
-Press for three seconds for turning the stimu-
lator OFF
-This switch can be used during the treatment
as a stop button
LOCK key
-To lock all keys, except
for the ON / OFF key,
press for 3 seconds.
-To unlock the keys press
for 3 seconds again.
Intensity key of the left
channel
-Press the key with the
arrow to increase the out
intensity of the left chan-
nel.
-Press the key with the
arrow to decrease the
out intensity of the left
channel.
It is forbidden the reproduction and the copy of this manual without written permission of producer. REV. ING. 3.0
6
20/02/2004 14.34 Pagina
ON / OFF key
Display
-Indicates mode, parame-
ters etc.
Program key
-Press this key to select
the program.
Intensity key of the right
channel
-Press the key with the
arrow to increase the out
intensity of the right chan-
nel.
-Press the key with the
arrow to decrease the out
intensity of the right chan-
nel.
8
DISPLAY
The device has a big display, which continuously gives information about the different parameters in use.
A Timer:
Shows the remaining time in minutes. The timer zone consists of a circular graph representation,
which moves during the performance.
B Performance indicator:
The figures of small man and impulses, indicate the correct execution of the program. The represen
ted graphic impulses are animated in different ways for each program. When this zone is light, it
means that a program is in progress.
C Intensity graphic indicator:
The graphic bar shows the intensity level in use.
D Intensity numerical indicator:
Shows the used intensity level included from 0 to 20 scale.
E Program indicator:
Shows the selected program.
F Lock key indicator:
It shows that the keyboard is locked except for the ON/OFF switch.
G Battery indicator:
The indicator lightens when the batteries are almost empty.
It is forbidden the reproduction and the copy of this manual without written permission of producer. REV. ING. 3.0
7