How It Works; What You Need - Cooper Lighting MS188 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Congratulations. You have purchased a motion activated floodlight. This security
lighting system will provide years of convenience and protection for your home and
family.

HOW IT WORKS

Your motion activated floodlight senses heat images
from objects such as people, large animals and automobile
engines. When motion is detected, the lights will automati-
cally turn on. Once motion has stopped, the lights will turn
off after a preselected time delay. Your motion activated
floodlight may also be used as a standard floodlight

WHAT YOU NEED

• Phillips screwdriver
• Outdoor weatherproof silicone caulking
WHATʼS INCLUDED
• Motion detector and light fixture (A)
• 300 watt quartz halogen bulb (B)
• Coverplate gasket (C)
• (2) #6 and (2) #8 coverplate screws (D)
• (3) Wire connectors (E)
WHAT TO KNOW
PLEASE READ THESE IMPORTANT SAFETY INSTRUCTIONS
• For outdoor use only.
• cULus LISTED for wet locations.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other
connection voids warranty.
• Fixture should be mounted to a grounded recessed junction box marked for use in
wet locations.
• Suitable for wall mount or eave mount only. NOT suitable for ground
mount installation.
• Do not allow sensor head to touch light housing – maintain at least 1˝ space
between fixture and sensor.
• For proper operation and protection against damage, the motion sensor head
adjustment knobs must be facing the ground
Call for customer service and/or missing or damaged parts (800-334-6871)
MS188, CMS188 (Bronze)
CMS188W, CMS188W (White)
2
English
180 degrees
A
B
C
D
E

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Cms188Ms188wCms188w

Tabla de contenido