MAC Audio MP 2.16 Manual Del Propietário página 9

Load capacity RMS / max.:
Impedance (nominal):
Frequency range:
Cutoff frequency(-ies):
Response:
Load capacity RMS / max.:
Impedance (nominal):
Frequency range:
Cutoff frequency(-ies):
Response:
POSITIONING AND SECURING THE SPEAKER SYSTEM (FIG. 1)
Use the mounting positions provided in your vehicle. If the speakers do not fit, they
can be placed in the rear window shelf.
Fig. 1
(1) Depth
(2) Driver diameter
Fig. 1A
(1) Use mounting ring to mark position of speaker opening and fastening holes
(2) Cut out opening and drill holes
Make sure that the subwoofer is secured in such a way that it cannot slip or
slide. Use the screws provided for this purpose. Damage resulting from
sudden changes in speed (e.g. hard braking) is not covered under the terms
of our guarantee.
CONNECTING TO THE RADIO / AMPLIFIER (FIG. 2)
The speaker system should preferably be connected to an external power amplifier.
This can provide the required electrical power and create corresponding dynamic
reserves. The relevant instructions also contain the customized connection diagram
for the operation of a speaker system.
GB
MP 16.2
65 w / 130 w
4 ohm
38 – 22 000 Hz
4000 Hz
90 dB/w/m
MP 10.2
45 w / 90 w
4 ohm
42 – 22 000 Hz
4000 Hz
89 dB/w/m
8
Autogood products Internet store "130"
MP 13.2
55 w / 110 w
4 ohm
40 – 22 000 Hz
4000 Hz
90 dB/w/m