Decimal Point - Eaton E5324E Serie Instrucciones De Operación

4.5 Min. value reset

4.6 Decimal point

The decimal point indicates
the num ber of decimal
places.
0
0.0
0.00
0.000
0.0000 four decimal places
4.7 Min. input signal (only if input
signal range is 4 – 20 mA or 2 – 10V)
This menu title allows a limitation of the
display range (see 4.9).
Depending on chosen input
range a) or b) is selected.
a)
b)
MN05401008E
Min. value can be reset
by pressing left button.
(Cur rent value becomes
new min. value)
Min. value canʼt be reset.
no decimal place
one decimal place
two decimal places
three decimal places
If the input signal level
at input range 4 – 20
mA goes below this
value, the display
shows "lo".
If the input signal level
at input range 2 – 10V
goes below this value,
the display shows "lo".
4.8 Displayed value at min. input signal
4.9 Max. input signal (only if input
signal range is 4 – 20 mA or 2 – 10V)
This menu title allows a limitation of the
display range.
Depending on chosen input
range a) or b) is selected.
a)
b)
4.10 Displayed value at max. input signal
A corresponding
display value between
-19999 and 99999
can be as si gned to
the lowest input sig-
nal. The decimal
pointʼs position is
considered.
If the input signal level
at input range 4 – 20
mA goes above this
value, the display
shows "high".
If the input signal level
at input range 2 – 10V
goes above this value,
the display shows
"high".
A corresponding display
value between -19999
and 99999 can be as si -
gned to the highest input
signal. The decimal
pointʼs po si ti on is
considered.
3