Listo AM L3 Manual De Utilización página 23

I
nstallatIon
The charging base can be placed on a flat surface (Diagram 1) or mounted vertically against
a wall (Diagram 2).
1. Find a location within 160 cm of an electrical outlet.
Note: Do not use an electrical outlet controlled by a switch.
2. Place the base against the wall in the desired location and make a mark in the centre of
each hole using a pencil, ensuring they are correctly aligned. The distance between each
hole is 3.7 cm.
3. Drill a hole in the centre of the first pencil mark. Place a wall plug in the hole and insert a
screw allowing its head to protrude slightly.
4. Drill the second hole, install the second wall plug and tighten the second screw.
5. Tighten the two screws so that the base is securely attached to the wall.
BEFORE FIRST USE
Diagram 1
23
Diagram 2
V.1.0