Maintenance And Storage - SKINERA MICRODERMABRASION Manual Del Usuario

After treatment
• Avoid direct sunlight immediately after treatment, and apply
sun factor SPF 30 or higher.
• You may wish to apply a facial mask, or apply a day or night
cream.

Maintenance and storage

It is important to clean your Skinera Microdermabrasion device
and store it properly after each treatment.
• First, unplug the device.
• To clean the device, wipe with a clean, dry cloth. Use a
cleaning fluid with no more than 70% alcohol, or another
non-abrasive cleaning fluid. Never use acetone or other
abrasive fluids, because they will damage your device.
• To clean the tip, first remove it from the device, wash with
soap and water, then dry thoroughly.
• To clean the filter, first remove it from the device, brush away
any debris using a soft brush, and place it back on the device.
• After cleaning, we recommend you store the device in its
original box.
• With the exception of the tips, never immerse your
Skinera Microdermabrasion in water.
Replacing the filter
The filter needs cleaning or replacing due to the build-up of
discarded skin. We recommend that you do this every few treatments.
To replace the filter:
1. Remove the tip from the device. You will then see the
rubber cap and the small black filter.
11
EN