DeLonghi EV250 Manual Del Usario página 5

Ocultar thumbs Ver también para EV250:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. DESCRIPTION
1.1 Description of the appliance (A)
A1. Rotating vent
A2. Water level indicator
A3. Castors
A4. Power cord winder
A5. Handle
A6. Power cord
A7. Removable water tank
A8. Filter housing
A9. Dust filter
A10. Cooling pad
A11. Honeycomb cooling pad
A12. Ice box/pack
1.2 Description of the control panel (B)
B1. ON/OFF button: to switch the appliance ON and OFF
B2. Speed fan. Press to selected the desired speed:
MAX,
MIN
B3. Cooler/Humidifying. Press to select or deselect the function
B4. Press to select the fan mode:
Natural
: the appliance performs random ventilation
cycles at different speeds, interrupted by a few seconds of
stop
Sleep
: the appliance runs 30 minutes at MAX speed,
then 30 minutes at MED speed: then runs at MIN speed
B5. "Swing" mode: when pressed, the grid rotates
B6. "AUTO OFF": press to set the delayed auto off (from 1 to 24
hours):
When on, the symbol
splay for 5 seconds: when turn on steady, the auto off time
is set
To deactivate: press the relative button until "00" is se-
lected, then wait until the symbol and the number switch
off.
1.3 Description of the display (C)
C1. "Auto-off" display
C2. "Cooler/Humidifying" "ON"
C3. "Ionizer" "ON" (active in every mode)
C4. "Sleep" fan mode "ON"
C5. "Natural" fan mode "ON"
C6. "Auto-off" setting
C7. "Swing" "ON"
C8. "MIN" fan speed
C9. "MED" fan speed
C10. "MAX" fan speed
1.4 Description of the remote control (D)
D1. ON/OFF: to switch the appliance ON and OFF
D2. "Swing": when selected, the vent rotates
MED,
and the hours flash on the di-
D3. "AUTO OFF" (see B6)
D4. Fan speed (see B2)
D5. Fan mode selection (see B4)
D6. Cooler/Humidifying. Press to select or deselect the function
2. USING THE APPLIANCE
1. Plug the appliance in: you will hear a beep and the applian-
ce is ready to use;
2. Remove the plastic tab from the battery (fig. 1);
3. To turn the appliance on, press the
The appliance turns on at MED fan speed and the ionizer
is on (fig. 2).
MED
2.1 Setting fan speed
1. Press the
button (B2 or D4);
2. When you press the button, the fan speed changes (
MED,
MAX,
MAX
MED
5
1
button ( B1 or D1).
2
MIN) (fig. 3).
MIN
3

Publicidad

Tabla de contenido
loading

Tabla de contenido