Operations And Functions - Vava VA-EE008 Guia Del Usuario

EN
Important
Before use of this product, the following instructions and precaution should always be followed:
1. Read this manual thoroughly and keep it for future reference.
2. Place the air purifier where it is not easily knocked over by persons in the household.
3. Always turn off the unit and unplug from the wall outlet when not in use.
4. To disconnect the power source, hold the plug to pull from the wall outlet. Never pull by the cord.
5. Stop using the product when it is damaged in any manner (including breakage of the cable).
6. Keep the cord away from heated surface.
7. For indoor use only.
8. Never use the appliance unless it is fully assembled
9. Do not run the power cord under carpets, and do not cover with throw rugs. Organize the cord
properly.
10. Do not use the purifier where combustible gases, vapors, or an oxygen rich environment are
present.
11. Don't expose this product to water or any other liquids. Keep away from moisture.
12. The air purifier must be used in its upright position.
13. Do not allow foreign objects to enter the ventilation or exhaust opening as this may cause
electric shock or damage to the air purifier. Do not block air outlets or intakes.
14. Don't use extension cord.
15. Don't sit, stand, or place heavy objects on the product.
16. This appliance can be used by children aged from 8 years and above and person with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
Specif ications
Model VA-EE008
Operating Voltage EU / UK: AC 220-240V 50Hz
US / CA: AC 100-120V 60Hz
Rated Power 50W
Dimensions 32.5 x 17.2 x 50 cm / 12.8 x 6.8 x 19.7 in
Net Weight 5.7 kg / 201.1 oz
CADR EU / UK: 230m /h
US / CA: 135cfm
Suitable Room Size 25-30 m2 / 269.1-322.9 ft2

Operations and Functions

Connecting to a power source, all the indicators on the control panel will flash once and a beep
sound will be heard. The product is in standby mode now.
POWER FAN
Press 3s, Auto mode
Power Button
Press the Power Button to turn on / off the unit.
Fan Speed Button
1. Press the Fan Button to cycle through turbo/ high /middle / / low wind modes.
2. Press and hold it for 3 seconds to enter automatic wind mode where all the wind indicators will light up.
Timer Button
Press the Timer Button to set 1h, 2h, 4h, 8h timer and turn the timer off.
Sleep Button
Press the Sleep Button to turn on / off the sleep mode. In sleep mode, all the indicators except the sleep
indicator will turn off.
Filter
Turbo
High
Mid
Low
TIMER SLEEP ION
Press 3s, to reset Filter
01/02