Vava VA-EE008 Guia Del Usuario página 5

Ocultar thumbs Ver también para VA-EE008:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ION Button
Press the ION Button to activate or turn off the ION mode.
Filter
Change Filter Reminder
1. Change the f ilter when this indicator flashes.
2. Press and hold the ION Button for 3 seconds to reset the unit after Installing of the new f ilter.
Note:
1.
when the unit is on, the Air Quality indicator will light up to show the current air quality:
Air Quality Indicator
Air Quality
Green
Good
Orange
Moderate
Red
Unhealthy
2. To achieve better purif ication, make sure to keep the purifier 30 centimeters / 11.8 inches away
from walls, furniture and so on and at least 50 centimeters / 19.7 inches away from metals /
electrical appliances.
3. In sleep mode, press the Sleep Button once to check the current settings. Press twice to turn
off the sleep mode.
4. In automatic wind mode, the unit will adjust the fan speed according to the results read by the
dust sensor (dust concentration).
Maintenance
1. Use soft brushes to dust off the f ilter regularly for better purif ication. Don't wash it with water.
2. Replace the f ilter when the Change Filter Reminder flashes:
1) Unplug the power source
2) Remove the rear grille
3) Take out the old f ilter by pulling the tabs.
4) Install a new or the cleaned f ilter and put the rear grille back on.
5) Press and hold the ION Button for 3 seconds to reset the unit.
The Change Filter Reminder will turn off.
03/04

Publicidad

Tabla de contenido
loading

Tabla de contenido