ISOUND Road Talk Guía De Usuario página 5

3. Turn the rst device's Bluetooth back on and the Road Talk will
automatically reconnect and allow both devices to be connected.
4. Volume can be adjusted om your device or Road Talk.
NOTES:
• The Road Talk can support up to two devices at once.
• The Road Talk will automatically repair with the device that
was last paired.
• If 2 devices are paired and one device receives a phone call,
the Road Talk will disconnect om the rst device paired and
automatically connect to the other device receiving the phone
call. Once the call is completed, the Road Talk will reconnect to
the rst device that was initially paired.
• The volume dial only controls the volume of the Road Talk.
Device volume should be adjusted separately.
Playing music via Road Talk
1. Move the power switch on the right side of the Road Talk to
the "ON" position and the speaker will say "Bluetooth mode".
2. Open the se ings on your Bluetooth device (Bluetooth must
be enabled).
3. Select Road Talk om the list of Bluetooth devices.
4. Once paired, you will hear "Bluetooth paired".
5. Volume can be adjusted by your device or Road Talk.
NOTE: The volume dial only controls the volume of the Road
Talk. Device volume should be adjusted separately.
Troubleshooting
Issue: My Road Talk doesn't turn on.
Solution: Try the following:
• Make sure the Road Talk is charged.
• Turn the Road Talk o and then back on until you hear a voice.