Especificaciones - BONAIRE T600 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
DO NOT OVER-INFLATE ITEM BEING
CAUTION
INFLATED.
To inflate vehicle and bicycle tires:
1.
Connect the 12 Volt power cord into DC 12 Volt power outlet.
2.
Connect the Quick Connect Valve Adaptor to item you are inflating and push
down the Valve Lock Lever to secure the connection.
3.
Move the On/Off switch to "ON" position and the inflator will begin to operate.
Monitor the PSI on the gauge to fill your item to desired pressure. Once you
have reached the desired air pressure, move the On/Off switch to the "OFF"
position.
4.
Remove the air hose from the tire by lifting up on the valve lever. You will then
easily lift the valve lever upward and it will easily release from the valve you were
inflating.
5.
Remove the 12 Volt power cord from the DC 12 Volt power outlet.
6.
Secure power cord and air hose in storage straps.
To inflate sports equipment, air mattresses, etc.:
1.
Connect the 12 Volt power cord into DC 12 Volt power outlet.
2.
Select the appropriate inflation accessory and insert into Quick Connect Valve
Adaptor by pushing the valve lever down until it is securely attached. (See ball
needle example diagram below).
3.
Insert the inflation accessory into desired item you are inflating.
4.
Move the On/Off switch to "ON" position and the Inflator will begin to operate.
Inflate your desired item to the correct pressure and move the On/Off switch to
the "OFF" position.
5.
Remove inflation accessory from Quick Connect Valve Adaptor.
6.
Remove the 12 Volt power cord from the DC 12 Volt power outlet.
7.
Secure power cord and air hose in storage straps.
5

ESPECIFICACIONES

PRECAUCIÓN
ESTE INFLADOR FUNCIONA SOLO CON 12 V CC. NO INTENTE OPERAR
ESTE INFLADOR CON NINGUNA OTRA FUENTE DE ALIMENTACIÓN O
VOLTAJE. NO REHAGA EL CABLEADO NI RECONFIGURE EL INFLADOR DE
MANERA DIFERENTE AL DISEÑO ORIGINAL PORQUE PODRÍA SUFRIR
DAÑOS CORPORALES O LESIONES PERSONALES.
Voltaje
Requerimiento energético
12 V CC
12 V CC – – Para usar sólo en
tomacorrientes de 12 V CC.
2

Publicidad

Tabla de contenido
loading

Tabla de contenido