Sunjoy L-GZ332PAL-C El Manual Del Propietario página 4

Fig.1: Insert decorative beam 1B (1D) to 1A (1C); tighten with bolt (AA) & flat washer (BB1).
Fig.2: Attach assembled beams to another respectively and tighten with bolt (CC) & flat washer (BB1).
Fig.3: Fix the Middle beam connecter (1E) on the middle of decorative beams by using bolt (AA) & flat washer (BB1).
Fig.4: Fix the Corner connector (1F) on the corner of the decorative beam with bolt (AA) & flat washer (BB1).
Hardware Pack 2
AA M6*15 bolt
BB M6 bigger washer
MM M6*50 bolt
EE M6*60 bolt
FF
Fig.5: Attach top slanting bar (2A) to top frame (3E) by using bolt (AA) and flat washer (BB).
Fig.6: Attach top slanting bar (2A) to corner connector (1F) by using bolt (EE), flat washer (BB) and nut (FF).
Fig.7: Attach middle beam (2B) to top frame (3E) by using bolt (AA) and flat washer (BB).
Fig.8: Attach middle beam (2B) to middle beam connector (1E) by using bolt (EE), washer (BB) and nut (FF).
M6 nut
32 PCS
136PCS
16PCS
36PCS
52 PCS