Listening To The Fm Radio; Tuning In A Station; Presetting Stations; Tune To A Preset Radio Station - Soundstream H-540DiMT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Parental
Playback of some DVDs can be limited depending
on the age of the users. The parental control system
allows the playback limitation level to be set by the
parent.
Note:
The lower the level, the stricter the limitation.
If the rating of the loaded DVD disc is higher
than the level you set, the system will require
a password. Enter your password and press the
ENTER button to start playback.
1
Select the desired parental control level from the
menu, then press the Enter button.
2
You will be prompted to enter your password.
Use the 0-9 buttons to enter 1234 (or your
privacy password if already established).
No need to enter a password if "Password
Mode" is set to OFF.
Default
All the items in the Setup menu (except for the
password and parental control) will be reset to the
default settings.
Password
Password Mode
You can temporarily unlock discs for playback
according to feature.
To change this setting, select On or Off, enter
your password, and press the ENTER button.
On
You need a password to change the level of
parental control.
Off
You can change the level of parental control
without a password. You cannot temporarily
unlock discs for playback.
Password
You can set a new password for parental control.
The default password is 000000.
1
Select "Change" and press the ENTER button.
2
Enter 000000 (or your privacy password) using
the 0-9 buttons.
3
Enter a new password.
4
Enter the same password again to confirm.
5
Press Enter button.
Note:
You will need your password to change the level
of control in the future as well as to temporarily
unlock discs for playback.
If you forget your password, use 000000.

Listening to the FM Radio

Tuning in a Station

1
Ensure that you have connected and fully
extended the FM antenna.
2
Press the TUNER button to select the TUNER
source.
3
Press and hold the H
frequency changes down or up automatically
until a station is found. Or press and hold H
G buttons repeatedly until you find the preset
station you want.
Note:
-
Press and hold
control to switch the grid between 100kHz and
50kHz.
-
The unit will automatically switch the Stereo or
MONO channel to receive the FM radio mode, it
can get the best effect.

Presetting Stations

You can preset up to 20 FM stations.
Program radio stations automatically
Press and hold the PROG button for 2 seconds
to activate automatic programming. All available
s t a t i o n s a r e p r o g r a m m e d i n t h e o r d e r o f
waveband reception strength.
-
The first programed radio station is played
automatically.
Program radio stations manually
1
Tune in the desired station, then press the
PROG button.
2
Press the 0~9,
the preset number.
3
Press the PROG button to store the station.
4
Repeat above steps 1 to 3 for each station you
want to store in memory with a preset number.
5
Press and hold the L button to erase the
memory radio stations.
Note:
If the system is unplugged or if a power failure
occurs, the preset stations will not be erased.

Tune to a Preset Radio Station

Press the
number that you want.
Note:
You can also use the numerical keypad to
select a preset station directly.
16
G buttons, the
/
button on the remote
BF
or
buttons to select
or
buttons to select a preset
/

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido