Other Features; Set The Alarm Timer; Set The Sleep Timer; Troubleshooting - Soundstream H-540DiMT Manual De Instrucciones

Other features

Set the Alarm Timer

In standby mode, you can use the daily timer setting
to turn the unit on automatically at a certain time
everyday under standby mode. However the clock
must be set correctly for the timer function to work.
1
In standby mode, press and hold the TIMER
button for several seconds, then press
button to select an alarm sound source.
2
Press the TIMER or ENTER button. Volume
indicator will blink. Set the alarm volume with the
button or button.
 
3
Press the TIMER or ENTER button. Hour
indicator will blink. Set the hour with the
or button.

4
Press the ENTER or TIMER button. Minute
indicator will blink. Set the minute with the
button or button.

5
Press the ENTER or TIMER button or ENTER
button. The selected time is set.
6
Set the daily timer to "ON" (daily timer set is
in effect) or "OFF" (daily timer disabled)
with the button or

Note:
* The operating time of every step shouldn't be
longer than 15 seconds or it will return to time
display.
To confirm the daily time

Press the TIMER button in standby mode, the
daily time is displayed. Wait for a second until
the display returns to the time display.
To cancel the daily timer setting

In standby mode, repeatedly press the TIMER
button until the "ON" will display, then you can
set the daily timer to "OFF" by pressing the
button or button (the daily timer will be
 
cancelled).
Turning off the system also cancels the daily
timer.

Set the Sleep Timer

Use the sleep timer to turn the system off after a
certain number of minutes when in play mode. By
setting the sleep timer, you can fall asleep to music
and know that your system will turn off by itself
rather than play all night.
1
Play a disc or tune in to the desired station.
2
To set the sleep timer by pressing the SLEEP/
TIMER button repeatedly, select a set period of
time (in minutes). The unit turns off automatically
after the set period of time.
/
 


button.


Troubleshooting

To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power.
- Ensure that the AC cord of the unit is connected
properly.
- Ensure that there is power at the AC outlet.
- Press standby button to turn the unit on.
No disc detected
- Check if the disc is inserted upside down.
- Wait until the moisture condensation at the lens
has cleared.
- Replace or clean the disc.
button
- Use a finalized CD or correct format disc.
No picture
- Check the video connection.
- Turn on the TV to the correct Video-In channel.
Black and white or distorted picture
- The disc does not match the TV color system
standard (PAL/NTSC).
- Sometimes a slight picture distortion may
appear. This is not a malfunction.
- Clean the disc.
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
- The aspect ratio is fixed on the loaded DVD disc.
- The aspect ratio may not be changed for some
TV systems.
Remote control does not work
- Before you press any function button, first select
the correct source.
- Reduce the distance between the remote control
and the unit.
- Insert the battery with its polarities (+/-) aligned
as indicated.
- Replace the battery.
- Aim the remote control directly at the sensor on
the front of the unit.
Disc does not play
- Insert a readable disc and ensure that the label
side is facing up.
- Check the disc type, color system and regional
code. Check for any scratches or smudges on
the disc.
- Press MENU to exit the system setup menu.
- Disable the password for parental control or
change the rating level.
17