DigiPower ActionPack Guia Del Usuario página 2

Batería recargable
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
PREPARING THE CAMERA FOR USE WITH THE ACTIONPACK
It is necessary to remove the USB door so the camera can connect to the ActionPack.
The USB door is designed to be safely removed and reinstalled on the camera as needed.
1. Open the USB door on the right side of the camera.
2. With the door open at a 90 degree angle to the camera body gently pull downward at a 45 degree angle
to remove the door.
3. Keep the door in a safe place,
you will need this when not
using the ActionPack on
the camera.
2

Publicidad

Tabla de contenido
loading

Productos relacionados para DigiPower ActionPack

Este manual también es adecuado para:

Rf-6h50Rf-6h50kit

Tabla de contenido