Specifications - Pulsar PWP20 Instrucciones De Manejo

Operating Instructions & Parts Manual
2 Inch & 3 Inch Water Pump

Specifications

Length x Width x Height
Dry Weight
Engine type
Displacement [Bore x Stroke]
Valve clearance
Spark plug
Spark plug gap
Idle speed
Max output
Max torque
Engine oil
Engine oil capacity
Fuel
Fuel tank capacity
Fuel consumption
Cooling system
Ignition system
PUMP
Suction port diameter
Discharge port diameter
Total head
Suction head
Discharge capacity
Pressure (maximum)
Continuous running time
515 x 440 x 425 (mm), 20.2 x 17.3 x 16.7 (in)
23 kg., 50.7 lbs.
4 Stroke, Overhead Valve, Single Cylinder
208cc
IN: 0.15 0.02 mm (cold)
EX: 0.20 0.02 mm (cold)
NGK: BPR6ES DENSO:W20EPR-U
0.028-0.031 in.
+200
1,400 rpm
-150
3,600 RPM
8.0 ft.-lbs. (10.8 NM) @ 2,500 rpm
SAE 10W-30, API SJ or SL, for general use
0.63 Qt., 0.6 (L)
Unleaded gasoline with a pump octane rating of 86 or higher
0.95 gal., 3.6 (L)
0.51 GPH, 290 (g/HP-Hour)
Forced air
Transistorized Magneto
2 in, 50 (mm)
2 in, 50 (mm)
105 ft
24 ft
123 gal/min
35.5 psi
Approximately 2-3 hours (actual time varies with pump load)
2
Model PWP20