Aux In Operation And Usb Operation - Grandin MUSIC 05 CI Manual De Instrucciones

English
Fast Forward and Reward
Press the or button to fast forward or fast reward by speed X2 (press once),
or speed X4 (press twice), press the third time to resume the normal speed.
Previous and next
Press the or button to go to the previous or next track/song.
Repeat
Press the REPEAT button once on remote control to repeat the current track (
press twice to repeat all the tracks (
ALL
Random
Press RANDOM button on remote control to play the tracks in a random order.
Press again to resume the normal playback order.
Note: Random play function cannot be activated with MP3 CD disc.
Tone setting
Press TONE button to select bass or treble, then press the Volume+/- buttons to
adjust the effect of bass or treble.
Program
The unit can play selected tracks from a disc in the programmed order.
1. Press STOP button to stop playing, then press PROGRAM button, it displays
P 0100.
2. Input the number of the track you want to program.
E.g. input 04, the fourth track will be programmed as the first song.
3. Then the unit will auto skip to the second program selection. The screen will
display P 0200.
4. Input the number of the tracks.
E.g. input 08, the eighth track will be programmed as the second song.
5. If you want to continue to program the track order, press the NUMBER buttons.
6. When you have finished programming, press PLAY/PAUSE to start playing in
the programmed order.
7. To review the program you can press the PROGRAM button again and use the
PREVIOUS/NEXT buttons to cycle through the programmed order.
8. To cancel programmed order playback, press the STOP button twice.
GB-12
);
). Press the third time to cancel.

AUX IN OPERATION AND USB OPERATION

You can enjoy music via other audio devices or a USB stick. Pay attention to the
picture below, and each connection must be safe and firm.
Aux in operation
1. Press AUDIO button on remote control or SOURCE button on the front panel
to enter AUX IN mode.
2. Connect the PC/phone/music player (one device) with the unit via a audio cable.
3. Once connected to aux in sockets, the playback control is operated by the outer
device, you may adjust the volume by the volume control on the unit.
USB operation
1. Insert the USB stick to the USB port on the front panel of the unit.
2. Press CD/USB button on remote control or SOURCE button on the front panel
to enter USB mode.
3. The player will auto-detect the device and start playing when it found the files.
4. Refer to BASIC OPERATION for more detailed operations.
NOTE :
1. Depending on the amount of data and media speed, it may take longer for the
unit to read the contents of the USB device. In some cases, reading time may be
as long as 60 seconds. This is not a malfunction.
2. Even when the files are in a supported format (MP3), some may not play or
display depending on the compatibility.
English
PC/phone/music player
GB-13