Niko 16-670 Manual Del Usuario página 14

16-670 & 16-672
Connection to the telephone exchange
- Unplug the plug before installing the appliance.
- Insert the cable with telephone lines through the provided opening at the back of the video distributor.
- Connect the analog telephone line to the connector block in the video splitter (fig.2).
- The connections TIP0 and RING0 are the connections for the telephone line to which the interface (16-651) is connected.
- The connections TIP1 and RING1, TIP2 and RING2, ..., TIP8 and RING8 are the telephone connections that correspond to outputs BP1, BP2, ..., BP8.
- Connect the internal units to the RJ45 connectors of outputs BP1, BP2, ..., BP8.
- Connect the power supply to the video splitter (230V) via the provided connection cable. The video splitter powers the interface and the internal units
through the connected cables.
Notes:
- Connect the internal units that only require a speech connection
(telephone) directly to the telephone exchange!
IN = TO INTERfACE 16-651
BP = INTERNAL UNIT
14
16-670
IN BP1 BP2 BP3
16-672
IN BP1 BP2 BP3
fig.2: connecting a telephone exchange to the splitter
16-678
SO BP1 BP2 BP3
16-678
SO BP1 BP2 BP3 BP4 BP5 BP6 BP7 BP8
BP4 BP5 BP6 BP7 BP8
EN