Starck NETATMO Manual Del Usuario página 12

Replace
Disconnect your old thermostat.
1
Remove it from the wall.
Pass the wires through the wall bracket
2
and screw it to the wall. To hide potential
scratches and holes left behind, you can
put the wall mounting plate first.
Screw the control wires previously identified
3
into the wiring terminals of the wall bracket
(no polarity). Insulate the unused wires.
Screw the protection cover onto
the wiring terminals.
12
2018-06 TH Manuel 1_filaire_V8.indd 12 01/06/2018 17:35:55